Ameripolish® PCA is a penetrating curing agent that chemically hardens and dust-proofs concrete for improved abrasion resistance without forming a coating. PCA is recommended on newly placed concrete to add initial water and stain repellency while retaining slab moisture for improved curing. PCA requires no UV light for dissipation and can be used with integrally colored concrete.
Ameripolish® PG-7K is a fast-setting, modified polymer, high-strength cement with outstanding bonding properties & characteristics formulated specifically to fill in small cracks, pinholes and surface irregularities in concrete floors. It also increases durability, gloss, and distinctness of image (DOI) on most floors. PG-7K readily accepts Ameripolish® concrete dyes and requires no special polishing procedures. Ameripolish® PG-7K Part A - Powder must be mixed with PG-&K Part B - Liquid.
Ameripolish® Strip & Clean is a water-based stripping agent specifically formulated for the grind-free removal of the Ameripolish® 3D SP sealer from polished concrete floors. Strip & Clean also is a great tool to prepare exterior concrete for ColorJuice applications. It helps remove mold, mildew and other contaminates that would otherwise impair the project.
Ameripolish® ColorSolve is a solvent carrier designed and recommended for use with Ameripolish® Classic and SureLock™ concrete dyes. ColorSolve is extremely easy to use and leaves little to no residual dye on the surface. Use of ColorSolve extends the dye coverage rate, increasing it up to 1,000 square feet per gallon!
ColorSolve should be applied by using an appropriate solvent sprayer with or without a microfiber mop.
Ameripolish® SureLock Dyes formula has recently been updated making them the most vibrant concrete dyes Ameripolish® has ever produced. SureLock Dyes are versatile colorants for polished concrete that mix with water or Ameripolish® ColorSolve™. SureLock Dyes are to be applied just before densifying with 3D HS or HSL, helping the color penetrate and chemically bond to the concrete
Ameripolish® 2D PL is a multi-silicate blend, that is intended for use on extremley porous concrete. 2D PL sets up faster than other Ameripolish®densifiers, this keeps the majority of the 2D PL at the surface of the concrete in order to harden the wearable surface. Its ideal use is on open or porous concrete that will readily accept densifiers. When used in conjunction with Ameripolish® SR² Stain Resistor it is especially effective at resisting stains.
Ameripolish® 3D HS (3 densifiers in one product) Hybrid Silicate Densifier improves surface performance and resists the harmful effects of traffic wear and weathering. By having 3 different size molecule silicates this product fully penetrates varying densities of concrete regardless of region or hardness. This improves the abrasion resistance for new or aged concrete. 3D HS is ideal for use for exposed and polished concrete, as well as cements with integral color.
Sealers and stain protecters
Ameripolish® 3D SP is a breathable semi-penetrating/semitopical sealer that helps to protect surfaces against stains and etching. 3D SP creates a water-resistant barrier that prevents liquids from infiltrating the surface, protecting against staining and color dispersion.
Ameripolish® 3D SP E™ is a breathable semi-penetrating/semitopical sealer that helps to protect surfaces against stains and etching. 3D SP E™ creates a water-resistant barrier that prevents liquids from infiltrating the surface, protecting against staining and color dispersion.
Ameripolish® AquaShield waterproofing treatment is a long-lasting treatment that provides water repellency to any concrete surface, helping to prevent staining and water damage. AquaShield coverage varies depending on the porosity of the concrete. Expect approximately 400FT2 per gallon on a broom finish and approximately 2,000 on less porous finishes.
Ameripolish® SR² is a penetrating stain repellent specifically formulated to protect polished, dyed and non-dyed concrete from oil and water-based stains. The water and oil repelling qualities of SR² provide superior stain protection on most substrates.
SR² can be used as a standalone product, but to obtain optimum performance, Ameripolish® SR² is recommended for use with Ameripolish®3D HS or HSL Densifiers.
Ameripolish® SR² WB is a water-based, penetrating stain repellent specifically formulated to protect polished, dyed and non-dyed concrete from oil and water-based stains. The water and oil repelling qualities of SR² WB provides superior stain protection on most substrates.
SR² WB can be used as a standalone product but, to obtain optimum performance, Ameripolish® SR² WB is recommended for use with Ameripolish® 3D HS or HSL Densifiers.
Cleaners and maintenance pads
Ameripolish® CFE 2000 is our latest cleaning solution designed to break down the toughest and most troublesome stains. CFE 2000 is very effective in environments where other aggressive chemicals are unsuccessful. CFE 2000 is eco-friendly and comes in a concentrate intended for automatic scrubber use.
Ameripolish® Rejuvenating Cleaner is a concentrated multipurpose cleaner that removes daily debris from hard surfaces, as well as reinforces the sealer to extend the life of polished concrete floors.
Rejuvenating Cleaner contains no harsh chemicals, and leaves no build-up on the surface. In addition to polished concrete, it is ideal for use on vinyl tile, ceramic tile, terrazzo, wood, and composite materials.
The SmartFloor™ concept is engineered to provide the end user with a highly aesthetic floor and an easy and economical way to maintain a polished concrete floor utilizing standard janitorial equipment and existing personnel.
The SmartFloor™ Pad System consists of DOI Inserts for daily maintenance and Stain Remediation Inserts (SRI) for remediating etches and stains from polished concrete floors.
Copyright © 2018 SmartfloorUK Ltd Polished Concrete System - All Rights Reserved.
Powered by GoDaddy Website Builder