Rapid Refloor is a 100% solids, two component, low viscosity structural polyurea/polyurethane hybrid intended for use in repairing cracks and small surface defects such as bolt holes and pop-outs in industrial, retail or commercial concrete floors. Rapid Refloor’s rapid set chemistry allows for return to service in 30 minutes or less.
Rapid Refloor XP is a two-component, 100% solids structural polyurethane/polyurea hybrid. When cured, Rapid Refloor XP is a rigid structural polymer with a Shore D Hardness of 75-80. Rapid Refloor XP was developed to repair a wide range of surface defects in industrial or stained/polished concrete floors including surface spalls/pop-outs, surface pitting, bolt-holes, random cracks and more.
Spal-Pro RS 88 is a 100% solids, two component heavy duty, semi-rigid polyurea joint filler intended for use in filling and protecting contraction and construction joints in industrial, retail or commercial concrete floors.
Edge-Pro 80 is a two-part, 100% solids, rapid-setting polyurea polymer liquid system. Edge-Pro 80 was developed to fill and protect joints in exposed concrete retail floors and in moderate-duty warehouse concrete floors. Its primary function is to protect joint edges from spalling under material handling vehicle traffic. Edge-Pro 80 is intended for use where final operating temperatures are from -20°F (-29°C) to +120°F (49°C).
SRG is a two-component, 95% solids structural polyurethane/polyurea hybrid. When cured, SRG is a rigid structural polymer. SRG was developed to fill/repair concrete floor surface imperfections such as air holes, popouts, surface pitting, scratches and gouges, etc.
SPF is a water based single component film forming liquid intended for use in the protection of concrete slab surfaces against staining which can result from epoxy joint filler overfill. SPF is water soluble and can be easily removed after joint filler installation is completed.
SPF-P will prevent staining in most polyurea fillers
Successful installation of cartridge-based joint fillers and repair products requires specialized dispensing guns tested and approved for optimal performance.
Many of our rapid-setting polyurea systems are packaged in dual component cartridge systems. Dual component cartridge systems, in conjunction with static mixer types engineered for specific polyurea products, allow for a proper chemical mix during the dispensing process.
To help protect your workers' backs while preparing a floor use the 8" Telescopic Scraper. This telescopic handle 8" scraper is a stand-up model that saves a lot of crawling. The twist-lock adjustable telescoping handle starts at 36" extending to 59" to accommodate a workers comfort level. Since it only weighs a few pounds, it is easily manoeuvred to reach are areas of the floor. The 8" Telescopic Scraper is the perfect tool when doing floor preparation.
Remove overfill of Polyurea without gauging the concrete surface with these great pads. Available in 5 & 7"
Pack of 10 spare blades for Crain scraper.
Additional nozzles for cartridge applied products.
Copyright © 2018 SmartfloorUK Ltd Polished Concrete System - All Rights Reserved.
Powered by GoDaddy Website Builder